Setup guide

How to set up a Hue smart button

There are two ways to connect a Hue smart button to your system: with a Hue Bridge or with Bluetooth.

Connect with a Hue Bridge

Connect with Bluetooth

Connect with a Hue Bridge

With a Hue Bridge, you can fully customize your Hue smart button — and setup is simple.

Before you start setup

Is your Hue Bridge connected and added to the Hue app?

Your Hue Bridge should already be plugged in, connected to Wi-Fi, and added to your Hue app. If you haven’t done that yet, first install your Hue Bridge.

Learn how to set up a Hue Bridge

Set up a Hue smart button with a Hue Bridge

  1. Press and hold the smart button for three seconds to activate the device. 
  2. Open the Hue app.
  3. Go to the Settings tab and tap Accessories
Settings

4. Tap Add accessory.

Add accessory

5. Tap Hue smart button

6. Once the Hue app has found the smart button, follow the on-screen instructions. You will be able to select which Room or Zone the smart button controls, as well as what it does.

Hue smart button

Need help?

If you need additional help setting up your smart button, browse our FAQ or get in touch with Philips Hue Support.

Hue smart button FAQ > 

Go to Support >

Connect with Bluetooth

1. Press and hold the Hue smart button for three seconds until it starts blinking.

Hue smart button

2. Hold the smart button up to the light you want to control. Stay within six inches of the light. 

3. Repeat for up to 10 bulbs.

4. To remove a light from the Hue smart button, repeat the same process, but hold the button for 10 seconds.